+++ /dev/null
-#!/usr/bin/env zsh
-
-# Protect against running with shells other than zsh
-if [ -z "$ZSH_VERSION" ]; then
- exec zsh "$0" "$@"
-fi
-
-# Protect against unwanted sourcing
-case "$ZSH_EVAL_CONTEXT" in
- *:file) echo "error: this file should not be sourced" && return ;;
-esac
-
-cd "$ZSH"
-
-# Use colors, but only if connected to a terminal
-# and that terminal supports them.
-
-# The [ -t 1 ] check only works when the function is not called from
-# a subshell (like in `$(...)` or `(...)`, so this hack redefines the
-# function at the top level to always return false when stdout is not
-# a tty.
-if [ -t 1 ]; then
- is_tty() {
- true
- }
-else
- is_tty() {
- false
- }
-fi
-
-# This function uses the logic from supports-hyperlinks[1][2], which is
-# made by Kat Marchán (@zkat) and licensed under the Apache License 2.0.
-# [1] https://github.com/zkat/supports-hyperlinks
-# [2] https://crates.io/crates/supports-hyperlinks
-#
-# Copyright (c) 2021 Kat Marchán
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-supports_hyperlinks() {
- # $FORCE_HYPERLINK must be set and be non-zero (this acts as a logic bypass)
- if [ -n "$FORCE_HYPERLINK" ]; then
- [ "$FORCE_HYPERLINK" != 0 ]
- return $?
- fi
-
- # If stdout is not a tty, it doesn't support hyperlinks
- is_tty || return 1
-
- # DomTerm terminal emulator (domterm.org)
- if [ -n "$DOMTERM" ]; then
- return 0
- fi
-
- # VTE-based terminals above v0.50 (Gnome Terminal, Guake, ROXTerm, etc)
- if [ -n "$VTE_VERSION" ]; then
- [ $VTE_VERSION -ge 5000 ]
- return $?
- fi
-
- # If $TERM_PROGRAM is set, these terminals support hyperlinks
- case "$TERM_PROGRAM" in
- Hyper|iTerm.app|terminology|WezTerm) return 0 ;;
- esac
-
- # kitty supports hyperlinks
- if [ "$TERM" = xterm-kitty ]; then
- return 0
- fi
-
- # Windows Terminal also supports hyperlinks
- if [ -n "$WT_SESSION" ]; then
- return 0
- fi
-
- # Konsole supports hyperlinks, but it's an opt-in setting that can't be detected
- # https://github.com/ohmyzsh/ohmyzsh/issues/10964
- # if [ -n "$KONSOLE_VERSION" ]; then
- # return 0
- # fi
-
- return 1
-}
-
-# Adapted from code and information by Anton Kochkov (@XVilka)
-# Source: https://gist.github.com/XVilka/8346728
-supports_truecolor() {
- case "$COLORTERM" in
- truecolor|24bit) return 0 ;;
- esac
-
- case "$TERM" in
- iterm |\
- tmux-truecolor |\
- linux-truecolor |\
- xterm-truecolor |\
- screen-truecolor) return 0 ;;
- esac
-
- return 1
-}
-
-fmt_link() {
- # $1: text, $2: url, $3: fallback mode
- if supports_hyperlinks; then
- printf '\033]8;;%s\033\\%s\033]8;;\033\\\n' "$2" "$1"
- return
- fi
-
- case "$3" in
- --text) printf '%s\n' "$1" ;;
- --url|*) fmt_underline "$2" ;;
- esac
-}
-
-fmt_underline() {
- is_tty && printf '\033[4m%s\033[24m\n' "$*" || printf '%s\n' "$*"
-}
-
-setopt typeset_silent
-typeset -a RAINBOW
-
-if is_tty; then
- if supports_truecolor; then
- RAINBOW=(
- "$(printf '\033[38;2;255;0;0m')"
- "$(printf '\033[38;2;255;97;0m')"
- "$(printf '\033[38;2;247;255;0m')"
- "$(printf '\033[38;2;0;255;30m')"
- "$(printf '\033[38;2;77;0;255m')"
- "$(printf '\033[38;2;168;0;255m')"
- "$(printf '\033[38;2;245;0;172m')"
- )
- else
- RAINBOW=(
- "$(printf '\033[38;5;196m')"
- "$(printf '\033[38;5;202m')"
- "$(printf '\033[38;5;226m')"
- "$(printf '\033[38;5;082m')"
- "$(printf '\033[38;5;021m')"
- "$(printf '\033[38;5;093m')"
- "$(printf '\033[38;5;163m')"
- )
- fi
-
- RED=$(printf '\033[31m')
- GREEN=$(printf '\033[32m')
- YELLOW=$(printf '\033[33m')
- BLUE=$(printf '\033[34m')
- BOLD=$(printf '\033[1m')
- RESET=$(printf '\033[0m')
-fi
-
-# Update upstream remote to ohmyzsh org
-git remote -v | while read remote url extra; do
- case "$url" in
- https://github.com/robbyrussell/oh-my-zsh(|.git))
- git remote set-url "$remote" "https://github.com/ohmyzsh/ohmyzsh.git"
- break ;;
- git@github.com:robbyrussell/oh-my-zsh(|.git))
- git remote set-url "$remote" "git@github.com:ohmyzsh/ohmyzsh.git"
- break ;;
- # Update out-of-date "unauthenticated git protocol on port 9418" to https
- git://github.com/robbyrussell/oh-my-zsh(|.git))
- git remote set-url "$remote" "https://github.com/ohmyzsh/ohmyzsh.git"
- break ;;
- esac
-done
-
-# Set git-config values known to fix git errors
-# Line endings (#4069)
-git config core.eol lf
-git config core.autocrlf false
-# zeroPaddedFilemode fsck errors (#4963)
-git config fsck.zeroPaddedFilemode ignore
-git config fetch.fsck.zeroPaddedFilemode ignore
-git config receive.fsck.zeroPaddedFilemode ignore
-# autostash on rebase (#7172)
-resetAutoStash=$(git config --bool rebase.autoStash 2>/dev/null)
-git config rebase.autoStash true
-
-local ret=0
-
-# repository settings
-remote=${"$(git config --local oh-my-zsh.remote)":-origin}
-branch=${"$(git config --local oh-my-zsh.branch)":-master}
-
-# repository state
-last_head=$(git symbolic-ref --quiet --short HEAD || git rev-parse HEAD)
-# checkout update branch
-git checkout -q "$branch" -- || exit 1
-# branch commit before update (used in changelog)
-last_commit=$(git rev-parse "$branch")
-
-# Update Oh My Zsh
-printf "${BLUE}%s${RESET}\n" "Updating Oh My Zsh"
-if LANG= git pull --quiet --rebase $remote $branch; then
- # Check if it was really updated or not
- if [[ "$(git rev-parse HEAD)" = "$last_commit" ]]; then
- message="Oh My Zsh is already at the latest version."
- else
- message="Hooray! Oh My Zsh has been updated!"
-
- # Save the commit prior to updating
- git config oh-my-zsh.lastVersion "$last_commit"
-
- # Print changelog to the terminal
- if [[ "$1" = --interactive ]]; then
- "$ZSH/tools/changelog.sh" HEAD "$last_commit"
- fi
-
- printf "${BLUE}%s \`${BOLD}%s${RESET}${BLUE}\`${RESET}\n" "You can see the changelog with" "omz changelog"
- fi
-
- printf '%s %s__ %s %s %s %s %s__ %s\n' $RAINBOW $RESET
- printf '%s ____ %s/ /_ %s ____ ___ %s__ __ %s ____ %s_____%s/ /_ %s\n' $RAINBOW $RESET
- printf '%s / __ \\%s/ __ \\ %s / __ `__ \\%s/ / / / %s /_ / %s/ ___/%s __ \\ %s\n' $RAINBOW $RESET
- printf '%s/ /_/ /%s / / / %s / / / / / /%s /_/ / %s / /_%s(__ )%s / / / %s\n' $RAINBOW $RESET
- printf '%s\\____/%s_/ /_/ %s /_/ /_/ /_/%s\\__, / %s /___/%s____/%s_/ /_/ %s\n' $RAINBOW $RESET
- printf '%s %s %s %s /____/ %s %s %s %s\n' $RAINBOW $RESET
- printf '\n'
- printf "${BLUE}%s${RESET}\n\n" "$message"
- printf "${BLUE}${BOLD}%s %s${RESET}\n" "To keep up with the latest news and updates, follow us on Twitter:" "$(fmt_link @ohmyzsh https://twitter.com/ohmyzsh)"
- printf "${BLUE}${BOLD}%s %s${RESET}\n" "Want to get involved in the community? Join our Discord:" "$(fmt_link "Discord server" https://discord.gg/ohmyzsh)"
- printf "${BLUE}${BOLD}%s %s${RESET}\n" "Get your Oh My Zsh swag at:" "$(fmt_link "Planet Argon Shop" https://shop.planetargon.com/collections/oh-my-zsh)"
-else
- ret=$?
- printf "${RED}%s${RESET}\n" 'There was an error updating. Try again later?'
-fi
-
-# go back to HEAD previous to update
-git checkout -q "$last_head" --
-
-# Unset git-config values set just for the upgrade
-case "$resetAutoStash" in
- "") git config --unset rebase.autoStash ;;
- *) git config rebase.autoStash "$resetAutoStash" ;;
-esac
-
-# Exit with `1` if the update failed
-exit $ret
projects / dotfiles.git / blobdiff